đźšš Free Worldwide Shipping on All Orders!Shop Now
NXP LPC1343FBD48,151 ARM MCU, LPC Family LPC1300 Series Microcontrollers, ARM Cortex-M3, 32 bit, 72 MHz, 32 KB, 48 Pins
HomeStore

NXP LPC1343FBD48,151 ARM MCU, LPC Family LPC1300 Series Microcontrollers, ARM Cortex-M3, 32 bit, 72 MHz, 32 KB, 48 Pins

NXP LPC1343FBD48,151 ARM MCU, LPC Family LPC1300 Series Microcontrollers, ARM Cortex-M3, 32 bit, 72 MHz, 32 KB, 48 Pins

$10.28
NXP LPC1343FBD48,151 ARM MCU, LPC Family LPC1300 Series Microcontrollers, ARM Cortex-M3, 32 bit, 72 MHz, 32 KB, 48 Pins—
$10.28

The Story

Product Overview

The LPC1343FBD48 is a 32-bit Microcontroller based on ARM Cortex-M3 core with RISC architecture operates at a maximum frequency of 72MHz. The ARM Cortex-M3 is a next generation core that offers system enhancements such as enhanced debug features and a higher level of support block integration. The ARM Cortex-M3 CPU incorporates a 3-stage pipeline and uses a Harvard architecture with separate local instruction and data buses as well as a third bus for peripherals. The ARM Cortex-M3 CPU also includes an internal prefetch unit that supports speculative branching. The device incorporates 32kB internal flash, 8kB internal RAM, 8-channel 10-bit A/D converter and 42 general-purpose I/O pins.

  • ARM Cortex-M3 built-in nested vectored interrupt controller (NVIC)
  • In-system programming (ISP) and In-application programming (IAP)
  • Selectable boot-up - UART or USB
  • USB MSC and HID on-chip drivers
  • USB 2.0 Full-speed device controller with on-chip PHY for device
  • UART with fractional baud rate generation, modem, internal FIFO and RS-485/EIA-485 support
  • SSP controller with FIFO and multi-protocol capabilities
  • Four general purpose counter/timers
  • Programmable watchdog timer (WDT)
  • System tick timer
  • Serial wire debug and serial wire trace port
  • High-current output driver (20mA) on one pin
  • High-current sink drivers (20mA) on two I2C-bus pins in fast-mode Plus
  • Integrated PMU (power management unit)
  • Three reduced power modes - sleep, deep-sleep and deep power-down
  • GPIO pins can be used as edge and level sensitive interrupt sources
  • Clock output function with divide
  • Processor wake-up from deep-sleep mode
  • Brownout detect with four separate thresholds
  • Power-on reset (POR)
  • Integrated oscillator with an operating range of 1MHz to 25MHz
  • 12MHz Internal RC oscillator trimmed to 1 % accuracy
  • Programmable watchdog oscillator with a frequency range of 7.8kHz to 1.8MHz
  • System PLL allows CPU operation up to the maximum CPU rate
  • Code read protection (CRP) with different security levels

Applications

Metering, Lighting, Security

Product details

Technical Specifications

Product Range

LPC Family LPC1300 Series Microcontrollers

Data Bus Width

32 bit

Program Memory Size

32KB

IC Case / Package

LQFP

Interfaces

I2C, SPI, UART, USB

ADC Channels

8Channels

Supply Voltage Min

2V

Operating Temperature Min

-40°C

IC Mounting

Surface Mount

MCU Series

LPC1300

MSL

MSL 1 - Unlimited

Device Core

ARM Cortex-M3

Operating Frequency Max

72MHz

No. of Pins

48Pins

No. of I/O's

42I/O's

RAM Memory Size

8KB

ADC Resolution

10Bit

Supply Voltage Max

3.6V

Operating Temperature Max

85°C

MCU Family

LPC

Qualification

-

SVHC

No SVHC (27-Jun-2024)

Other details

Brand NXP
Part Number LPC1343FBD48,151
Quantity Each
Technical Data Sheet EN Download technical document - datasheet - Tanotis India

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

Description

Product Overview

The LPC1343FBD48 is a 32-bit Microcontroller based on ARM Cortex-M3 core with RISC architecture operates at a maximum frequency of 72MHz. The ARM Cortex-M3 is a next generation core that offers system enhancements such as enhanced debug features and a higher level of support block integration. The ARM Cortex-M3 CPU incorporates a 3-stage pipeline and uses a Harvard architecture with separate local instruction and data buses as well as a third bus for peripherals. The ARM Cortex-M3 CPU also includes an internal prefetch unit that supports speculative branching. The device incorporates 32kB internal flash, 8kB internal RAM, 8-channel 10-bit A/D converter and 42 general-purpose I/O pins.

  • ARM Cortex-M3 built-in nested vectored interrupt controller (NVIC)
  • In-system programming (ISP) and In-application programming (IAP)
  • Selectable boot-up - UART or USB
  • USB MSC and HID on-chip drivers
  • USB 2.0 Full-speed device controller with on-chip PHY for device
  • UART with fractional baud rate generation, modem, internal FIFO and RS-485/EIA-485 support
  • SSP controller with FIFO and multi-protocol capabilities
  • Four general purpose counter/timers
  • Programmable watchdog timer (WDT)
  • System tick timer
  • Serial wire debug and serial wire trace port
  • High-current output driver (20mA) on one pin
  • High-current sink drivers (20mA) on two I2C-bus pins in fast-mode Plus
  • Integrated PMU (power management unit)
  • Three reduced power modes - sleep, deep-sleep and deep power-down
  • GPIO pins can be used as edge and level sensitive interrupt sources
  • Clock output function with divide
  • Processor wake-up from deep-sleep mode
  • Brownout detect with four separate thresholds
  • Power-on reset (POR)
  • Integrated oscillator with an operating range of 1MHz to 25MHz
  • 12MHz Internal RC oscillator trimmed to 1 % accuracy
  • Programmable watchdog oscillator with a frequency range of 7.8kHz to 1.8MHz
  • System PLL allows CPU operation up to the maximum CPU rate
  • Code read protection (CRP) with different security levels

Applications

Metering, Lighting, Security

Product details

Technical Specifications

Product Range

LPC Family LPC1300 Series Microcontrollers

Data Bus Width

32 bit

Program Memory Size

32KB

IC Case / Package

LQFP

Interfaces

I2C, SPI, UART, USB

ADC Channels

8Channels

Supply Voltage Min

2V

Operating Temperature Min

-40°C

IC Mounting

Surface Mount

MCU Series

LPC1300

MSL

MSL 1 - Unlimited

Device Core

ARM Cortex-M3

Operating Frequency Max

72MHz

No. of Pins

48Pins

No. of I/O's

42I/O's

RAM Memory Size

8KB

ADC Resolution

10Bit

Supply Voltage Max

3.6V

Operating Temperature Max

85°C

MCU Family

LPC

Qualification

-

SVHC

No SVHC (27-Jun-2024)

Other details

Brand NXP
Part Number LPC1343FBD48,151
Quantity Each
Technical Data Sheet EN Download technical document - datasheet - Tanotis India

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.